[MUYANG-SFSP]Feed Hammer Mill & Grinder & Crusher(25-35 t/h)

Feed Hammer Mills for sale: Brand:MUYANG Water-drop 968 Capacity:25-35 t/h Power:110/132/160 kW Model:SFSP112*60E(60Hz) Muyang SFSP112*60E Water-drop 968 Hammermill--High Effciency, Low Power, Stable Performance 

√ Real water drop figure grinding chamber design, beyond image and full of connotation

√ Interlocked screen hold-down fixture (patent) helps to change two-step or multi-step screen pressing into one-step processing, which avoids screen pressing unevenness caused by multi-step working, so that the grinding chamber is guaranteed to run in a fully sealed situation. Patent No. ZL98 2 42415.9

√ Each rotor is tested and checked in high-precision and dynamic balance in a strict way in order to ensure machine stable running and reduce wearing of bearings and hammer holders, so repairment of equipment is minimized,production efficiency is elevated,and service life of equipment is extended.The machine is equipped with humanized designed sliding opening access door, ease of operation and maintenance,and reduction of labor intensity.Patent No. ZL 98 2 42414.0

√ The high-precise large-diameter rotor is tested by dynamic balancing, enhancing grinding efficiency.

√ Real water drop figure grinding chamber design, quick discharging.

√ “W” shaped double grinding structure, output increases by 25%Sliding fully-opening access door,interlocked screen hold-down fixture, more convenient operation and maintenance.

Processing parameters, Ease of matching:

Model

968-II

968-III

968-IV

968-V

SFSP112*40E

SFSP112*60E

SFSP112*80E

SFSP112*110E

Power (kw)

75

90

110

110

132

160

200

220

250

250

315

355

amount of wind needed(m3/h)

3800~4200

5400~6000

8200~9000

11000~12000

Feeder

TWLY25*30

TWLY25*44

TWLY25*75

TWLY25*102

the minimum sectional area of settling bucket(m2)

0.5

0.7

1

1.35

Settling bucket specifications (upper width * bottom width * height)(mm)

1200*462*800

1400*564*900

1400*564*1000

1400*600*1350

1400*780*1500

Impulse dust collector

LNGM30(40 sleeves)

LNGM45(60 sleeves)

LNGM63A(84 sleeves)

LNGM81A(108 sleeves)

Centrifugal fan

6-23-12No.6.3C N=7.5kW

6-23-12No.8C N=11kW

5-48-11No.5.6C N=15kW

5-48-11No.6.3C N=22kW

Air duct diameter (mm)

Fan inlet duct

340

400

480

550

Fan outlet duct

400

480

600

650

Enclosed auger

TLSUF25

TLSUF32

TLSUF32

TLSUF40

TLSUF50

Elevator

TDTGK40/23

TDTGK40/28

TDTGK50/28

TDTGK50/32

TDTGK60/33

Note:1.Above-mentioned technology parameters are based on the coarse crushing configuration. Coarse crushing refers to that raw materials are crushed by grinder with sieve hole over Φ2.0mm and the ground products range from 20 to 40 mesh.2.In the technology configuration, fan parameters are not suitable for plateau region and those parameters must be made revision if used in plateau region.

Performance parameters:

Name	Model	Capacity(t/h)	Power(kW)
968-III(60Hz)	SFSP112*60E	25-35	110/132/160

...

[MUYANG-SFSP]Feed Hammer Mill & Grinder & Crusher(25-35 t/h)